Introduction of wire mesh decking

 The raw material of the mesh laminate is made of high-quality cold drawn wire spray welding, forming a grid of 100 * 50. The bottom is reinforced with stiffeners, and both sides are flattened and placed on the shelf beam to ensure the safety of the goods. General load up to 3Ton, surface treatment for zinc plating or plastic spraying.

Advantages of mesh laminate:

1.Visualization is convenient for management;

2.It can be stored manually without pallet storage;

3.No tools are needed for the installation of mesh laminates.

characteristic:

1.The mesh layer plate is firm and has strong bearing capacity, which is convenient for clean storage of bulk goods.

2.The installation of mesh laminates can be used for the storage of 1-3T goods.

3.The installation of mesh laminates does not need to be connected and can be directly placed between beams.

4.Mesh laminate design to prevent objects from falling from the sky.

5.The installation of mesh laminate can make the pallet size diversification on the shelf.

6.It is made of high-quality cold drawn wire spray welding, and the bottom is reinforced with reinforcing rib, so the structure is more solid.

7.With the use of heavy shelf, it can save cost and put firmly.

Size:

Generally, the wire mesh decking are made according to the size of the heavy shelf. According to the different bearing requirements, the manufacturing styles of the mesh laminates are also different, which can be summarized as follows:

Wire diameter: 4.04.5 5.0 grid: 50 * 50, 50 * 100, 25 * 25, 50 * 25;

Stiffener: generally, it is a strip steel with an unfolded length of 86 mm and flattened at both ends.